The PristineBidet turns any
bathroom into an oasis of
luxury and hygiene.
The Pristine uses nature’s
most gentle and essential
element, water.
Purifying. Relaxing.
Quite simply,
it's a new concept of clean.

Technical

Will A Pristine Bidet Fit Your Toilet?

The Pristine bidet seat will fit most residential toilets in Australia. Unless you have a toilet with a square bowl or unusual shape, the Pristine should fit your toilet. To confirm, please check and double check all measurements prior to ordering.

 

To make sure that a Pristine bidet will fit your toilet, simply follow the instructions below:

  1. Firstly, look to see whether you have a stop-tap visible (the little tap supplying water to the cistern).  If yes, excellent; if not, call us or email to discuss your options. 
  2. Determine if you have a round or elongated shaped toilet; most toilets in Australia are round shape.  When we say “round shape”, we do not mean round literally; we mean the traditional oval shape.  Elongated toilets are longer and usually ‘pointier’ at the front.  Compare your measurement B with the chart and decide if your toilet is round or elongated.
  3. Next, measure the distance between your mounting bolt holes, (measurement C) to determine if the seat will bolt on to your toilet.
  4. Can you access the underside of your toilet to unbolt your toilet seat?  If yes, excellent.  If not, don’t panic; some newer toilets have concealed seat fixing (as in Fig. 3) and we have Pristine concealed fixings available.
  5. Lastly, measure the distance from the centre of the bolt holes to the face of cistern to determine proper clearance at the back.

 

Fig1Typicalclosecoup1.jpg - large

 

 

Measurement

Round Seat type

Elongated Seat type

A

≥ 495mm

≥ 525mm

B

415 – 445mm

450 – 480mm

C

130 – 200mm

130 – 200mm

Clearance at back

minimum 50mm

minimum 50mm

 

Fig2Wallfacetoilet.jpg - large

 

Fig3Concealedfixpan.jpg - large

 

Please note: if the measurement from the centre of bolt holes to the cistern is less than 50mm, the Pristine bidet may extend over the front edge of your toilet bowl as there may not be enough room to slide the seat all the way back on the mounting plate.

 

If you have any questions at all regarding compatibility or fit, please give us a call on 1300 883 766 or send us an email


 

Pristine Technical Specifications

 

Pristine

501

302

202

101

 

General Specifications

Control

Remote Control

Side Arm Control

Rated Voltage

AC 220V – 240V, 50Hz

Max. Power Consumption

1670W

Power Cord Length

1.8 metre

Water Inlet

Direct connection with Backflow Protection Device

Water Inlet Pressure

0.7 ~ 7.5 kgf/cm²       (0,07MPa ~ 0.75MPa)

Round Seat Dimensions

406 x 503 x 145

486 x 503 x 145

Elongated Seat Dimensions

406 x 503 x 145

486 x 503 x 145

Shipping Dimensions

570mm x 540mm x 190mm

Shipping Weight

7.6kg

7.7kg

Wash Functions

Power Consumption

1600W

Wash Flow Volume

0.7 litre/ min.

Femme Flow Volume

0.7 litre/ min.

Turbo Flow Volume

0.7 litre/ min.

N/A

Water Pressure Control

5 settings

Water Temperature Control

4 settings, room temp. ~ 38ºC

Nozzle Positions

5 settings

Safety Devices

Temperature sensor, Thermal bimetal fuse

Drier Function

Power Consumption

250W

N/A

Drier Temperature Control

5 settings, room temp. ~ 50ºC

Safety Device

Thermal bimetal fuse

Heated Seat

Power Consumption

55W

Seat Temperature Control

4 settings, room temp. ~ 42ºC

Safety Device

Temperature sensor, fuse

Seat Sensor

Body contact sensor in seat

Deodoriser

Filter

Catalytic Filter

N/A